IAP10S Intelligent Absolute Pressure Transmitter

Advanced Performance Transmitters

 

Considered the one transmitter that can do it all, the IAP10S, IGP10S, and IDP10S pressure transmitters cover most of your applicationneeds with a single range. These transmitters offer embedded FoxCal™technology and multiple points of calibration, which allow you tobenefit from wide rangeability and one of the best reference accuracy turndowns on the market. These transmitters have an accuracy ofup to ±0.05% of reading, and HART transmitters are SIL 2 certified.

These pressure transmitters provide absolute pressure (AP), gauge pressure (GP),and differential pressure (DP) measurement.

  • Absolute pressure transmitters measure pressure relative to vacuum. Gauge pressure transmitters measure pressure relative to ambient air pressure. Both absolute and gauge transmitters are used in a wide variety of oil, gas, water and industrial applications.
  • Differential pressure transmitters measure the difference between two pressures applied to opposite sides of the sensor. The output signal is proportional to either the differential pressure or its square root.
    • Differential pressure transmitters are often used for measuring fluid flow rates across a primary device such as an orifice plate, but can also be used for othertypes of differential pressure measurements such as liquid level, interfacelevel, or density measurements.

Transmitters can be connected in series to instruments such as recorders, controllers,and indicators

Key Features

The Advanced Performance pressure transmitters offer the following features:

  • Absolute, Gauge, and Differential Pressure transmitters
  • HART digital outputs, FOUNDATION Fieldbus digital outputs, 4 to 20 mA outputs
  • TüV SIL 2 certification for HART transmitters
  • 5-year proof test interval for pressure transmitters installed in SIL 2 Safety loops
  • Accuracy up to ±0.05% of reading• Response time of 100 ms for AP/GP transmitters and 125 ms for DP transmitters
  • Innovative and dynamic FoxCal™ technology allows the transmitter to storemultiple factory-preset calibration ranges up to 30:1 turndown, while maintainingpublished accuracy without the need for field calibration
  • Time in Service meter features cumulative power-up time and time powered sincelast user reset for HART and FOUNDATION Fieldbus transmitters
  • High Turndown Capabilities2(up to 400:1)
  • Ability to locally configure the device with pushbuttons on the optional local display
  • Ability to remotely communicate with and configure the device using the devicedescriptor (DD), Device Type Manager (DTM), or the Field Device Integration(FDI) package
  • Optional External Zero Adjustment
  • Field-proven piezoresistive silicon microsensors help ensure excellentmeasurement performance
  • Simple, elegant sensor design with very few parts achieves exceptional reliability
  • Durable aluminum or 316 ss housing options are available; both meet NEMA Type4X and IEC IP66/67 ratings
  • Differential pressure (DP) transmitters are available with traditional and low profileor Coplanar™structures
  • Depending on transmitter structure, sensor diaphragm materials include 316L ss,nickel alloy3, Co-Ni-Cr, Monel™, or Tantalum™
  • ½ NPT male, ½ NPT female, or M20 male process connections
  • Numerous mounting bracket set options
  • Process venting and bleeding options
  • Special degreasing and cleaning options
  • Low temperature options
  • Custody transfer lock and seal option
  • Many configurations of direct connect or capillary connected seals
  • Dual Seal certified by CSA to meet ANSI/ISA 12.27.01-2003 requirements
  • Complies with electromagnetic compatibility requirements of European EMCDirective 2014/30/EU by conforming to following EN and IEC Standard: EN61326-1:2013
  • NACE MR0175 and MR0103 compliant for all process wetted parts; optionalNACE approved bolt material available
  • Optional certification options allow transmitters to meet numerous requirementsfor hazardous and non-hazardous locations
  • CE marked; meets the requirements of applicable EMC, ATEX, RoHS, and PEDEuropean Union Directives
  • Multi-marking protection concepts available for ATEX, CSA, FM, IECEx, andINMETRO
  • Standard 5-year warranty (optional 17-year warranty)